宝钢2050热轧粗轧新的基础自动化控制系统机械电子工程专业论文.docxVIP

东托大学硕士学证论文 东托大学硕士学证论文 摘要 宝锶2050热轧粗轧毅的基础自动化控制系统 摘要 宝钢2050热车k枫缎子1989年投产至今己使熙卡多年。出于该极缳懿鑫动他 系统存在诸多闯题，宝钢决定分阶段对该系统进行改造。2000年10月宝钢和西 门子公司签订粗轧区基础自动化设备引进协议，标志着该项耳进入了实质性启动 除段。这次寰镧2050热毒I糕莪藜石篷鸯动诧系统泼造耨系统懿应爝软件盘宝信公司 和西门子公司共同完成。目前应用软件编制已经完成，项目正处于紧张的调试之 中。该项基计划于今年底投入使用。颞系统采熙了珏fj子公司SIMAY孵TDC疆 件系统，采稻了西门子公司新开发的SIROLL 2这一热轧专用的软件结构。画面 操作显示采用WIN CC。新系统投入后，由于采用了一系刿的额技术、新功能、 毅技割思想，羧粥会对热载今瑟豹产品矮登窝产量豹掇高产生推动作麓。 关键词；基础自动化粗轧控制戡钢 一Ⅱ一 承北大学硕士学位论文 承北大学硕士学位论文 Abstract The roughing mill new basic automation control system for Baosteel 2050mm Hot Rolling Mill Plant Abstract Baosteel 2050mm Hot Rolling Mill Plant was put into operation in year 1989，and has been used for over 10 years．Because the automation system of this hot rolling mill has a series of problems，Baosteel decided to make the revamping to this system．In October 2000 Baosteel and SIEMENS signed a contract to import basic automation control devices for roughing mill from SIEMENS。It’S the sign that the project has started its essential stage。The application software of the roughing mill basic automation system was realized by BAOSIGHT and SIEMENS Now the application software of this project has finished and is under commissioning According to the time schedule，the new system will be put into operation in the end of this year．The new basic automation has used SIMATIC TDC of SIEMENS as the new hardware system，and used the SIEMENS new developed SIROLL 2(special for hot rolling mill contr01)as the new application software structure，The human machine interface for picture display and operation has used SIEMENS WIN CC system Because the new basic automation system has used a lot of new techniques，new mnctions and new control ideas．we can foresee that the new system will help the Baosteel hot rolling mill plant to improve its product quality and increase its production output rate． Key word：basic automation roughing milt control rolling 一珏l一 声 声 明 本人声明所