打孔PE2fPP双组分热风粘合非织造布的工艺和性能分析.pdfVIP

打孔PE/PP 双组分热风粘合非织造布的工艺和性能研究 STUDY ON THE PROCESS AND PROPERTIES OF PERFORATED PE/PP BI-COMPONENT HOT AIR THROUGH BONDED NONWOVENS ABSTRACT Currently, in the Chinese market, spunbonded nonwovens is the very popular material as the surface layer used in the disposable hygiene products, but with the continuous improvement of living standards, consumer’s needs for disposable hygiene products are getting higher and higher, soft, fluffy and breathable hot air though bonded nonwoven fabric products have attracted more and more consumers. To further improve the air permeability, absorbency and rewet capability of the bi-component hot air through nonwovens, this thesis put the focus on the study of the perforation machine, perforation process and perforated material properties of the bi-component hot air through nonwovens After the bi-component hot air through nonwovens had been made, it was delivered to the perforation machine which was developed by the thesis. In order to achieve the suitable shape of the hole, concave-convex rollers had been continually improved on design. The pilot machine and process were continuously modified and improved, eventually we developed the perforation machine with the capacity of mass production and it could accommodate the different basis weight of bi-component hot air through nonwovens. In this thesis, the changeover of the machine for perforating on 22gsm and 27gsm bi-component hot air through nonwovens was convinent without changing any fitting but only changing the proc