多热源工业合成sic新技术节能提质优化理论与应用矿物加工工程专业论文.docxVIP

关键词：碳化硅多热源炉温度场数值模拟ANSYS工艺参数炉芯数目研究类型：应用研究 关键词：碳化硅多热源炉温度场数值模拟ANSYS工艺参数炉芯数目 研究类型：应用研究 Subject Subject ：Theory and Application of Energy-saving and Quality—improving and Optimization for SiC Industrial Synthesis New Technology by Multi·-thermal·-source Furnace Specialty ：Mineral Process Engineering Name ：Guo Jihua(Signature) ‘¨霄?眦 Instructor：Wang Xiaogang The new technology of indmmal synthesizing SiC by Multi-thermal-·source Furnace comes into mature through small．scale tests in the lab，pilot．plant tests and the commercial tests，and is used widely in SiC industry,especially in Qin曲ai and Ningxia Province．Several 矗lInace cores are used in Multi-thermal—source Fnmace，while single a furnace core is used in traditional Acheson Furnace．thus the heat inner Multi—thermal．soure￡Furnace is scattered，the temperature field is even，and the area fit for SiC growth is larger．Therefore the product increases and the energy is saved．By the means of numerical method，the character of SiC synthesis furnace’s temperature field and how did the pmcess conditions affect the tempemtlue field were studied，The temperature zone fit for SiC synthesized can be improved，thus the product can be increased．the quality can be improved and the energy can be saved essentially． The temperature inner SiC synthesis furnace w-as measured by the designed experiment． And the relation between temperature of furnace core surface and power supply system was studied．Then temperature inner the furnace was predicted based on the mcasured temperature． Temperature measuring experiment is the foundation ofnumerical calculation． The mathematical model of Multi-thermal．source Furnace was founded after heat transfer analysis．The solution of temperature field differential equation is determined by Monodromy nonambiguity conditions，so the physical condition,geometrical condition，time condition and boundary condition were studied jndividually on也e character of SiC synthesis furnace．The differential equation can be solve