约束条件下拉伸与旋转特征模型重建方法.pdf

30 2 ( ) Vol. 30 No2 2005 4 Journal of Kunming University of Science and Technology ( Science and Technology) Apr . 2005 1, 2 2 2 陈宏明 , 彭雨哟, 周来水 ( 1. , 223001; 2. , 210016) : 在对测量数据根据特征设计意图进行分块的基础上, 将常见造型特征如拉伸和旋 特征 的参数提取以及草图轮廓的拟合 化为相应的约束优化问题进行求解, 然后利用CAT A 二次开 发平台CAA 中提供的接口进行特征重建, 生成参数化的实体特征模型. 实例表明本文的特征重 建方法是可行的. : 逆向工程; 特征造型; 约束优化; 模型重建 :TP391. 7 : A : 1007- 855X( 2005) 02- 0032- 05 Way to Reconstruct the Feature Model under Constraint- Based Extrusion and Rotation 1, 2 2 2 CHEN Hongming , PENG Yuyo , Z HOU Laishui ( 1. Huaiyin nstitute of Techno logy, Huai an Jiangsu 223001, China ; 2. Nanjing University of Aeronautics and Astronautics, Nanj ing 2 10016, China) Abstract: On the basis of segmenting 3D measured data with feature design intent ion, the parameter extraction of the features obtained by several common modeling methods such as extruding, revolving , and the f itting of sket ch profile are transformed into the resolution of constraint optimization problem. With the interface of CAA - the secondary development platform of CAT A , the parameterized solid feature models can be reconstruct ed. Ex perimental results demonstrat e that the method presented here is reliable. Key words: reverse engineering ; feature modeling; constraint optimization; model reconstruction 0 , CAD/ CAM . . , , . CAD : , , ; ! , ; ∀ , ; #, ; ∃ [ 1] CAD CAPP/ CAM . , [ 2] . ( ) , , , , CAT A CAA CAT A . : 2