基于ARM嵌入式温度控制器设计-电气工程专业论文.docxVIP

贵州大学硕士论文 贵州大学硕士论文 PAGE PAGE 2 Embedded Temperature Controller Based on ARM Abstract Temperature control is widely used in industrial production, and it is quite significant in process control, and the effect of temperature control directly influences the control effect of whole production system. Temperature control exists in almost all fields in daily life. In traditional process control, PID control is often adopted in temperature and other parameters control, which is with simple principle, convenience, strong robustness, and low susceptivity to variance in control objects. Therefore, PID control is still basic control mode widely used in process control, especially in deterministic system which can be established exact mathematical model. However, large time-lag and strong interferences exist in temperature control process, and the temperature test chamber has the characteristics of nonlinearity, time change, and uncertainty, exact mathematical model can hardly be achieved, traditional PID control can not completely meet our needs. Fuzzy-PID controller is a new kind of controller which need not depends on exact mathematic model and has strong adaptability. Thus, aim to improve the non ideal control effects to complex, nonlinear, time change, lag controlled objects, after contrasting several advanced PID control algorithm, fuzzy-PID control algorithm is studied in Philips ARM7 LPC2210 embedded system, to improve the shortages of parameter determining, control accuracy, real-time in PID control. Thereby, control performance of the whole temperature test chamber could be improved to adapt high control accuracy. Temperature control system and fuzzy-PID algorithm are discussed in this paper, and MATLAB simulation and relevant programs are got. Besides, experiment results are analyzed. It is showed that fuzzy-PID control algorithm has advantages of quick response, little overshoot, strong anti-interference ability compared to traditional PID control; and of contr