基于dsp的光纤微弯压力传感器的研究与实现-通信与信息系统专业论文.docxVIP

AbstractWith Abstract With the rapid development of Very Large Scale Integration(VLSI)and computer，the technology of Digital Signal Process(DSP)is applied in variOUS domains such as cormunication，condition—monitoring．In the doman of project—monitoring，it is advocated and spreaded and developing at a high rate because of i ts notable advantages，especial ly after the emergence of the technology of diStributed fiber sensing．ThiS paper studies and realizes a kind of s aJIlple sensor which meets the needs of special project—monitoring． Firstly，thiS paper diseusses the geometrical condition which iS necessary for the l i ght propogation in the fiber and analyses the condition for the coexistence of light—wave of different pattern in the transmission from the view of light waveguide and the condition needed for mutual conversion among di ff’erent patterns and presents the formula of the relationsbiP between attenuation and distance，which provides the theory for the drawing of OTDR curve，Then thiS paper diSCUSS the loss aroused by Rayleigh—dispersion，studies the character of backward dispersion optical acquires the optimal method on processing signal—BOXCAR．This paper discusses BOXCAR OR its theory，character of real—time process，the contrast of S／N pre and after the process in detail．At last．this paper discusses the sensing theory of strain senseing setting，all of which provide reliable theory support for the realization of distributed fiber microbend strain sensor． In addition，this paper constructs the hardware platform of the whole system based on DSP(TMS320VC5402)and offers detai led discuss On every part of the system which embodies the system’S advantage．It iS important that this paper achives the realization of the system through software including IJ data，s data，s c011ecti。n and process and drawing OTDR cNrve．In further，this paper brings up amendatory scheme after anaiyseing the system’s capacity and deficiency． The content of tbis paper keeps up