减速机箱体性能分析及关键技术研究-机械工程专业论文.docxVIP

中原工学 中原工学院硕士学位论文 摘要 万方数据 万方数据 力云图可知，箱体的最大应力出现在输出轴承座孔与轴Ⅱ结合区域，应力值为 11.8MPa，分析结果表明箱体的设计合理。 关键词：箱体载荷计算 三维功能模型 模态分析 模态试验 静力学分析 Research on the Key Technologies for Analyzing the Performance of the Gear Reducer Box Specialty: Mechanical Engineering Name: Yang Shufeng Supervisor: Professor. Li Yong; Senior Engineer.Chen Demu; Associate Professor.Chen Fang Abstract The gear reducer has been widely used in modern production, its performance directly affect the operation of the whole system. The box is an important part of the gear reducer, playing an important role in supporting, damping and cooling on the normal operation of gear reducer，so it is necessary to analyze the structure of the box. In this dissertation, the free modal analysis and the static analysis of the gear reducer box were explored by means of the finite element method. The major works are summarized as follows. On the basis of design of gear, calculation of gear load, calculation of Shaft and bearing load in the gear reducer, calculation model of the gear reducer box load was constructed. The parameterized program for transmission design of spiral bevel gear was exploited. The method for processing tables and charts related parameters was researched. Taking VB as the tool， Calculation program of the gear reducer box load was compiled by VB language, calculation model of the gear reducer box load was parameterized. The method was illustrated with an example of the TK series gear reducer. During the internship, the phenomenon of gear reducer box damage was appeared in the enterprise, through the study on the helical gear and spiral bevel gear load in the gear reducer, the problem of axial force superposition in the TK series gear reducer was discovered，meanwhile，discussed the solution. Three dimensional simplified model of gear reducer box was established. The method of box element type selection, definition of material properties meshing was discussed. The model was preprocessed by HyperMesh software, anal