基于Midas和Ansys的半地下贮液池抗震性能分析-结构工程专业论文.docxVIP

ABSTRACT With the revision of the specifications and the improvement of requirements and the building performance degradation due to various natural and anthropogenic impacts, which may have a variety of security risks. We need to reanalyze the seismic performance of the reservoir which was built according to the original specification or has been used for a long time, so as to check out whether the reservoir could meet the need of performance and production or not. Therefore, how to analyze the built reservoir and definite the safety of the structure have been an important subject in front of the engineering and technical personnel, and this is also the research purpose of this paper. We analyzed the whole process of the seismic calculation of a reservoir tank which was built in Sapporo, Japan, and this work was based on many design methods, such as the design method of two stages and the horizontal seismic intensity recommended by the Japanese Civil Association, the method of seismic calculation and organized result given by Japanese Water Works Association, and the dynamic time-history analysis method. This paper uses two different methods of calculation， one is the seismic degree method of the static analysis. According to the corresponding seismic dynamic intensity of Level 1 and Level 2, Midas software was used to establish a three-dimension model of fluid reservoir with the consideration of soil compact, then the results were divided into pieces to be organized by the horizontal endurance maintains method, and we can determine the reinforcement refurbishment program by the resulting scope and causes of destruction. The other method is dynamic time-history analysis, we selected the corresponding intensity El-centro wave and Tianjin wave of Level 1 and Level 2，and the two-dimensional model of two typical cross-section of the fluid reservoir were established by Ansys software to analyze the built soil unit. And then by the select of typical nodes and the anal