基于有限质点法的半刚连接钢框架非线性动力倒塌分析.pdf

中国科技论文在线 Nonlinear dynamic collapse analysis of semi-rigid steel frames based on the Finite Particle Method# 1 2** 5 ZHU Xingyi , YU Ying (1. Key Laboratory of Ｒoad and Traffic Engineering of Ministry of Education ，Tongji University ，Shanghai 200092，China; 2. Department of Civil Engineering, Shantou University, 515063) Abstract: This paper presents a numerical procedure based on the Finite Particle Method (FPM) for 10 nonlinear dynamic collapse analysis of plane steel frames with semi-rigid connections. The FPM models the plane frame with finite separated particles, which includes the geometrical nonlinearity, material nonlinearity and dynamic fracture. The fictitious motion is used to consider the geometrical nonlinearity. The explicit time integration method is applied to solve the dynamic equilibrium equations. Particles are free to separate from each other with FPM, which is advantageous in the 15 simulation of member fracture. The fracture criterion and fracture model of the FPM are developed to simulate member fracture. An independent zero-length element considering the influence of nonlinear and hysteretic connection stiffness is adopted to simulate the rigidity of steel beam-column connection. The nonlinear response results are compared with those of existing studies to verify the accuracy of the proposed numerical procedure. The collapse analysis of a Vogel six-story frame shows that frames with 20