基于光纤光栅传感技术模压腔内分布式压力测量系统研究-材料物理与化学专业论文.docxVIP

ABSTRA(玎In ABSTRA(玎 In the course of industuial production,there are many parameters need to me鹊ure，such as pressure，temperature,and the pressure is one of the most important parameters,SO，measuring and controlling pressure correctly ensure industuial production in right operation．Especially，in the middle of pressing moulding incendive and explosive material in molding chamber,measuring and controlling pressure distribution is the foundation and security of safe production,we can prevent effectively destruction and explosion which is caused by high-pressure in molding chamber． Usually,to get the spatial distribution information of pressure field，we neeed to dispose many point-se脚rs，and then synthesize the discrete information which is acquired by the poim-senSOrs，evidently,this is a quite complicated and expensive method．Especially 0n some peculiar occasion of incendive and explosive situation, strong electromagnetic Interference and narrow space，the optical fibre grating distributed sensor has great advantage，compared with other SCRSOrs，the optical fibre grating sensor has many merit：Firstly,optical fibre grating sensing system belongs to full glossy system，have no existence of electric field，prevent explosion． Secondiy,optical fibre grating senSOring signal can transmit long distance and have no electromagnetic interference．Thirdly,optical fibre grating 5ensor fits for the occasion of requiring small size sensing detector．And at last，it is convenient to join up many optical fibre gratings in a stick of optical fibre and carry out distributed measurement by using wave-division—multiplex technology． This paper，focusing on the problem of electric sensor measuring pressure on the flammability occasion and joining up the advantage of optical fibre grating 5e1X50I, research and design a kind of distributed pressure measuring system in molding chamber based on optical fiber grating sensing technology．It also elaborates a new pressure measuring method which is distributed