基于多智能体的晶圆制造系统多目标优化与重调度方法研究-控制工程专业论文.docxVIP

建具有完全信息的N人非合作博弈模型，并通过改进的基于知识的多智 建具有完全信息的N人非合作博弈模型，并通过改进的基于知识的多智 能体进化方法搜索博弈模型纳什均衡点，获得调度方案。 3、针对晶圆制造系统中不确定性事件频发容易导致原调度方案失 效的问题，研究一种基于多智能体的晶圆制造系统重调度方法，利用多 智能体强大的通信能力获取系统的实时信息，构建能综合考虑工件的订 单信息、加工进度与原调度方案的偏差、加工区负载变化的缓冲区agent 决策模型。 将本文研究的方法应用到晶圆制造系统仿真模型中，对仿真结果进 行的分析总结表明：智能体系统中各agent通过实时通信和协商，根据 自身决策模型做出决策，有利于实现晶圆制造系统的多目标优化与重调 度，具有一定的借鉴意义。 关键词：晶圆制造系统，多智能体，多目标优化，重调度 万方数据 ABSTRACTSTUDY ABSTRACT STUDY oF MUIJI．oBJECTIVE oPTIMIZATIoN AND RESCHEDULING METHODS BASED ON MUIJI．AGENT FoR WAFER FABRICATIoN SYSTEM ABSTRACT Wafer fabrication system is the typical representative of the large and complex manufacturing system．It is difficult to schedule the whole system through establishing a mathematical model or traditional intelligent optimization method．Meanwhile，uncertainty factors in production line make more demand of high—efficiency and real—time to the scheduling algorithm．The large-scale complex problem is decomposed into dispersed small problems by multi-agent technology．Agents in the system form a logical unit through the communication and negotiation with each other to complete a task together．So it contributes to decrease the scale of the problem to be solved and increase the speed of problem solving．Meanwhile the ability of real—time response of the system is improved．In this paper，the research of multi．objective optimization and rescheduling for wafer fabrication system based on multi—agent is carried out from the following aspects： (1)According to the characteristic of mutual coupling between the III 万方数据 北京化工大学硕士学位论文shops，machines 北京化工大学硕士学位论文 shops，machines and work in process(WIP)in the wafer fabrication system， constructs a multi-agent based scheduling framework which structure is hierarchical network for wafer fabrication system to achieve the communication and negotiation between any two agents directly or indirectly，which help to ensure all the agents can nlake full use of the whole information in the system to improve the overall performance and responsiveness