结构中短肢剪力墙的受力性能分析-结构工程专业论文.docxVIP

西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 Stress Performance Research on Short-pier Sheer Wall in Structures Speciality: Disaster Prevention and Mitigation Engineering Master Candidate: Yang Fei Supervisor: Prof. Li Xiaoli Abstract Being a new type of structural component to resist lateral force, short-pier sheer wall has been widely used in high-rise buildings in China, which has the advantages of not out projecting from the face of the wall and of good seismic performance. At present, the study on short-pier sheer wall is far behind the engineering practice, which has seriously affected the application and development of short-pier shear wall structure. Therefore a systematic study on stress performance of short-pier sheer wall has become an issue for immediate attention in engineering design. In this paper the short-pier sheer wall is defined as a special kind of shear wall, and we use 89 specimens of finite element models as the research object, through theoretical analysis of the finite element ANSYS, to make a systematic study on its stress performance. The research includes steps as follows: The first step is to propose the necessity of short- pier shear walls’ classification. By comparing and analyzing the bending moment and lateral drift value with 12 specimens of 8、10、12、14 layers of short-pier sheer walls, the paper makes it that under horizontal obtriangular load,different short-pier shear walls prove to have the mechanical properties of small openings integral wall, united limb wall and wall framework respectively. The standard of short- pier shear walls’ classification only aim at the depth-thickness of section, we should classify the short-pier shear wall in structures, taking its stress performance into consideration when we designing. Secondly, the paper gives the discriminant criteria for short-pier sheer walls in structure design. Using ANSYS, we work on the internal force of 80 specimens of 12 layers of coupled symme