光纤传能系统中传输模块的设计与性能分析-光纤通信与光波技术专业论文.docxVIP

万方数据 万方数据 Abstract Electrical energy transmission has been developed for a long time, the technology is relatively mature, but there are many defects. With the advance of science and technology, the requirements of environment for energy transmission become higher and higher, traditional energy transmission has been unable to meet the demand of high efficiency and security. With the development of technology ,the optical fiber transmission system will replace the energy transmission as a new mode of transmission，and the optical fiber will play an important role. Firstly, the optical fiber transmission system was introduced, the system transfer the energy by light with 4 modules. This paper focuses on the transmission module. By the combination of photonic crystal fiber and traditional fibers, the triangular lattice photonic band gap fiber is proposed. On this basis, in order to reduce the material absorption, silicon dioxide ( SiO2 ) is used as the substrate material of optical fiber. Secondly, RSoft software combined with Plane Wave Method (PWM) is used for the simulation study. With different duty ratios of the cladding simulated, it is concluded that when air filling factor is 0.85, the lattice constant is 1.6um, the fiber can transmit 850nm wavelength. Then, by using the finite element method (FEM) combined with COMSOL software, the same photonic crystal fiber package layers with different core sizes and the same core size with different photonic crystal fiber package layers were simulated. The simulation results show that if the fiber transmits energy with surface modes, the leakage loss will increase, the presence of surface modes is only related to the core size, and it has nothing to do with the cladding layers. On this basis, the final design of the core radius is 26um, photonic crystal fiber cladding layer is 15 layers, the loss is 0.0105dB/km. Finally, the device of every module is selected and listed the application of system. Keywords: Opti