空冷汽轮发电机定子内流体流动与传热的数值模拟-热能工程专业毕业论文.docxVIP

华中科技 大学硕士 学 华 中 科 技 大 学 硕 士 学 位 论 文 II万方数据 II 万方数据 ABSTRACT Large turbo-generator during operation, the electromagnetic and mechanical losses inside the motor will produce a lot of heat. If the heat generated by the losses can not be scattered out effectively, this may cause the local temperature rise of the generator is too high and affect the operation of the safety and life of the generator directly. Especially for large air-cooled turbo-generator, ventilating and cooling systems is an important guarantee safe and stable operation of the motor. Therefore, the cooling system for the turbine generator ventilation flow and heat transfer study has very important significance. Firstly, according to 320MW air-cooled turbo-generator’s stator air-cooled ventilation and cooling system features, establishing the fluid field model of stator ventilation system and the coupling model of flow with heat transfer. and gives the corresponding description of mathematical physics. By using CFD software calculate the stator ventilation system fluid field model in rated condition, and get the ventilation system detailed flow characteristics, such pressure, velocity, flow distribution. On the basis of the calculation of the stator fluid field, make coupling solve for the stator field and temperature field. Analyzing the temperature distributions in the generator’s ventilation system and stator, provide some references to ventilation system design optimization and monitoring of the actual operation of the generator. In order to study the air distribution in ventilation system and air gap radial height impact on flow and heat transfer in the generator, Different air distribution conditions between air gap inlet and stator back plenum inlet and different radial height of the air gap structure model programs has been calculated respectively. Conducted a preliminary study in the air distribution system optimization and structural optimization, and get some useful conclusions. Thought the n