面向机械振动监测的无线传感器网络自适应同步采集方法研究-机械电子工程专业毕业论文.docxVIP

  • 1
  • 0
  • 约5.41万字
  • 约 64页
  • 2019-05-14 发布于上海
  • 举报

面向机械振动监测的无线传感器网络自适应同步采集方法研究-机械电子工程专业毕业论文.docx

重庆大学 重庆大学硕士学位论文 英文摘要 II II ABSTRACT Wireless sensor networks as a new information collection system, applied to the field of mechanical equipment condition monitoring, not only can improve the flexibility, maintainability and scalability of the monitoring system, but also to achieve the monitoring of moving, rotating equipment. So it has great value in engineering. However, in practical mechanical vibration monitoring applications, especially the high-frequency vibration signal synchronous acquisition application put forward higher requirements for wireless sensor networks. After analyzing the characteristics and actual demand of wireless sensor networks in machinery and equipment condition monitoring applications, on the basis of a wireless sensor network node WSNs-G2.2 which is developed by our research group, this paper present a new adaptive synchronous acquisition method for mechanical vibration monitoring using wireless sensor networks which can achieve high-precision mechanical vibration signal synchronous acquisition; At the same time, a novelty kind of multi-channel MAC protocol for wireless sensor networks, which can improve the performance of network throughput, latency and packet loss rate when compared with the original protocol, is designed to ensure reliable transmission of data information; Finally, through the comparing steel rectangular frame experimental modal analysis, the adaptive synchronization acquisition method is verified. Firstly, according to the characteristics of wireless sensor networks and the actual demand in the machinery and equipment condition monitoring applications, on the basis of a wireless sensor network node WSNs-G2.2 developed by our research group, an adapt synchronous acquisition method for mechanical vibration monitoring using wireless sensor networks come out. The method sends synchronization commands to periodically synchronize started by radio, start cross-layer collecting and compensate the accumulated error to impro

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档