煤矿井下中央水泵房排水系统的自动化改造-机械工程专业毕业论文.docxVIP

- - I - 摘 要 摘 要 为了实现右江矿务局塘内煤矿井下中央泵房排水系统（以下简称排水系统）的 自动化改造，本论文对比和分析了大量的书籍和相关技术资料。根据国内外的矿井 排水系统自动化改造的发展状况及趋势和塘内矿的实际状况设计了井下排水系统 的总体改造方案。按照充分利用原有资源的原则，原排水系统的硬件大多数都不用 更换。 本论文共分六章，前面五章分别介绍了排水系统的国内外现状、课题的来源、 塘内矿现状及改造方案、就地集中控制箱的设计、传感器及执行结构的选择设计及 排水系统软件的设计；第六章分析本篇文章的不足和以后研究重点，其主要的研究 内容如下： (1) 确定排水系统改造整体方案，根据设计方案选择了各个电磁阀、电动闸阀及其 控制箱、流量传感器、液位传感器、压力传感器、真空度传感器、温度传感器。 (2) 设计了基于 PLC 的集中控制系统，实现了对各种传感器的数据采集。利用 PLC 处理采集到的数据，并根据设置好的参数，控制各个执行机构的动作，然后利 用 PLC 的通信功能将各种数据及时发送到地面监控中心。 (3) 利用 GX Developer Version 7 编程软件及其 GX Simulator6-C 仿真软件的编程和 仿真功能，对 PLC 进行编程和程序仿真。用组态王软件对排水系统进行组态控 制，通过与 PLC 通信实现对排水系统的远程实时监控。 关键词：中央泵房；PLC；自动化改造；集中控制 - - II - Abstract Abstract In order to achieve automatic transformation of Youjiang mining bureau Tang Nei mine central pump house drainage system. According to the development status and trend of domestic and foreign mine drainage system automation transformation, Tang Nei mine actual condition, we designs of the underground drainage system overall scheme. According to the principle to making full use of existing resources, most of the original drainage system hardware does not have to be replaced. This thesis consists of six chapters, The front five chapters introduce the drainage system domestic and foreign current situation, the sources o f the subject, Tang Nei present situation and transformation scheme, the design of centralized control box on the spot, the choice and design of sensor and actuator structure and the design of the drainage system software；The sixth chapter analyzes the de ficiency of this article and the focus of future research. Its main research contents are as follows: To determine the drainage system reconstruction overall scheme. According to the design scheme to select each solenoid valve, electric valve and its control box, flow sensors, liquid level sensors, pressure sensors, temperature sensors, vacuum sensor. The design of local centralized control box which bases on PLC achieves a variety of sensor data capture.Use PLC to Pr