空调系统动态能耗分析与仿真-供热;供燃气;通风及空调工程专业毕业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Air conditioning system is the main part of the building energy consumption, repre- senting about 60% of the total building energy consumption,nowadays people pay more attention to energy saving today,so building energy efficiency is more and more im- portant.Now part of the operation of the air conditioning system has a lot of problems, most of the time,the air conditioning system are in part load operation state, and part of the air conditioning load of the running state is not in the best condition, caused serious waste. this paper simulated the dynamic load of the air conditioning system operation, find the control strategy of dynamic load of air conditioning system in the running state , so that the operation of the air conditioning system has been in a state of energy saving. This article mainly from the point of view of the air conditioning system dynamic operation do the energy saving research. Using the Simulink toolbox of MATLAB soft- ware establish the physical model of each component of air conditioning system,and then the components connected constitute the whole air conditioning system model. Estab- lished four research variables and they are chilled water outlet temperature, cooling water flow, cooling water inlet temperature, cooling water flow; Through the data that operation from the air conditioning system model to fit that energy consumption of air conditioning system with four variables function relation, and then to draw the constant load energy consumption minimum with four variable value, and then calculate a few sets of data, and get conclusion that the dynamic load of the air conditioning system optimal operation state is four variables with the load change input curve. Through the above research can be concluded that the dynamic load of the air condi- tioning system in optimal operation about energy saving 30%, water chillers, cooling wa- ter pump, cooling water pump energy saving effect