煤矿下运带式输送机的节能设计电气工程专业毕业论文.docxVIP

山东科技大学硕士学位论文摘要 山东科技大学硕士学位论文 摘要 摘 要 带式输送机具有长距离、大运量、连续运输等优点，已成为煤炭高效开采机电一体 化技术与装备的关键设备。在煤矿中，下运带式输送机可较大幅度地减少矿区的巷道工 作量，降低基建费用和缩短施工周期。但下运带式输送机的速度控制所需的制动功率很 大，如果制动装置设置不合适时，将导致制动装置的损坏、闸瓦烧坏等事故。 本文重点介绍了下运带式输送机节能控制器的设计以及速度控制，根据矿井中的特 点，分析比较了当前下运带式输送机控制方案，提出了下运带式输送机节能控制器的方 案。在硬件方面，详细分析了下运带式输送机的结构原理和工作特点，阐明了下运带式 输送机的控制系统设计思路、工作原理、硬件构成，进行了技术参数的计算、器件选型。 设计出了下运带式输送机的电气电路及控制电路。在软件设计方面，进行了下运带式输 送机的控制系统的程序设计以及下运带带式输送机在重载和轻载情况下的启动与制动程 序设计。 关键词：下运带式输送机；四象限变频器；发电运行状态；能量回馈 ABSTRACT The advantages of downward belt conveyor are long distance, large transport volume, and continuative transport etc. becoming efficient coal enterprises production mechanical electrical integration technology and equipment important device. On coal mine system, downward belt conveyor can greatly decreased roadway work load in mine area, decrease capital construction cost and shorten construction cycle. But the speed control of downward belt conveyor needs large barking power, if barking device setting misfit, it can cause the braking device damaged, brake shoe burn out etc. In this paper, the design of energy saving controller and speed control of downward belt conveyor were introduced, by analyzing its control functional requirements, the author analyzed different control system of downward belt conveyor that have been used. According to the characteristics of mine system, design the general structure of downward belt conveyor. In the part of hardware design, the structure principle and working characteristics of downward belt conveyor were studied, expounds the control system design thought, working principle and hardware structure of downward belt conveyor, and carried out technology parameters calculation, parts selection. Design the downward belt conveyor electric circuit and control circuit. In the part of software design, carried out programming of control system, and under heavy haul and light load situation, design starting and barking programming. Keyword：downward belt conveyor； 4-quadrant inverter； pow