脉冲电流烧结电源的分析-电力系统及其自动化专业毕业论文.docxVIP

华 中 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract In recent years, nanomaterials has become a hot topic in materials science research because of its exceptional performance. As a new rapid sintering technology, Pulse current sintering can effectively prevent surface diffusion and grain coarsening to expected ultrafine even nanostructures. This paper designs a pulse current sintering power according to the requirements of the pulse current sintering ,provides a experimental platform for the research of pulse current sintering process and mechanism. This paper first introduces the status and development direction of the current pulse current sintering power at home and abroad, and clarifies the need for this research and the research content. Then, in accordance with the requirements of the power supply design, a phase shift full bridge ZVS converter is selected as the power supply topology. After detailed analysis of the work process and circuit characteristics, the part three calculates the key parameters of the main circuit and simulates the main circuit. In the hardware design of the control system, TIs TMS320F2812 is chosen as the core control chip, and the hardware circuit is designed on the base. In the software design, the incremental PI control algorithm is used to closed- loop control of the output current. In addition, the designs of the overvoltage and under-voltage protection, IGBTs over-current and overheating protection, soft start function improve the reliability of the power supply. Finally, based on the above analysis and design, 14V/700 power supply prototype is successfully developed. The power and sintering system is tested and three amorphous alloy sintering experiments are completed. The analysis results of the power waveform and sintered samples and sintering temperature show that the power system is designed reasonably and has achieved the desired electrical performance requirements , it would provide a research platform for pulse current sintering