临时高压消防给水系统压力开关流量开关启泵值的探讨.doc

临时高压消防给水系统压力开关、流量开关启泵值的探讨 Discussion on the values starting pump of flow switch and pressure switch in the temporary high pressure fire protection water supply system. 刘斌 （中信建筑设计研究总院有限公司，武汉430014） 摘要：目前国际上发达国家常用的启泵信号是压力和流量，其原因是可靠性高，根据《消防给水及消火栓系统技术规范》GB50974-2014第11.0.4条的规定：消防水泵应由消防水泵出水干管上设置的压力开关、高位消防水箱出水管上设置的流量开关、或报警阀压力开关等开关信号直接自动启动消防水泵。 Abstract: Because of the high reliability, at present, the signal of actuating pump commonly used of developed countries in the world is the pressure and flow rate. According to the article 11.0.4 of 《code for fire protection water supply and hydrant systems》G