汽车后制动蹄夹具设计与装配工艺规划（有cad源图等）.docVIP

汽车后制动蹄夹具设计与装配工艺规划（有cad源图等） 本科毕业设计论文 题目:汽车后制动蹄夹具设计与装配工艺规划 院 (系): 机电信息系 专 业: 机械设计制造及其自动化 班 级: 学 生: 学 号: 指导教师: 72013年 5月 汽车后制动蹄夹具设计和装配工艺规划摘 要 根据制动蹄夹具设计的加工要求,本设计的主要内容汽车后制动蹄夹具设计和装配工艺规划,工件在加工前必须首先使它工件装夹的实质,就是在工件上进行定位和夹紧,装夹工件的目的,就是通过定位和夹紧而使工件过程中始终保持其正确的加工位置,以保证达到该工序所规定的的加工技术要求,定位和夹紧分别是工件装夹的一个环节,只有将二者综合结合起来,先点位再夹紧,才是装夹。全面考虑夹具设计所需的部件以及各个部件的布局,明确各个部件的作用以及技术要求,从工件出发,分析及确定加工用量,根据切削用量选择动力部件设计传动链,一方面,夹具设计是工件能否在夹具上加工的关键,根据工件技术要求,分析定位,挡板,支撑板定位,限制了工件的六个自由度,保证加工要求。本设计设计出了器械和汽车后制动蹄夹具设计和装配工艺规划,解决了工件夹具以及夹具上难加工的工件,制动蹄片是汽车后制动器系统的一个重要部件,制动蹄片的质量是直接影响制动性能的零件,基准是用于确定生产对象上几何要素间的几何系所依据的点,线,面,在加工中用以定位的基准称为定位基准。 关键词:夹具;工件;制动蹄片After the car brake shoe fixture design and assembly process planningAbstract According to the requirements of the brake shoe fixture design and processing, the main content of the design of automobile rear brake shoe fixture design and assembly process planning, the workpiece before processing must first make it the essence of the workpiece clamping, positioning and clamping on the artifacts, is the purpose of the clamping workpiece, through the positioning and clamping and machining process always maintain the correct position, to ensure the processing technical requirements specified in the process, positioning and clamping workpiece clamping of a link, only combine the comprehensive point first, then the clamping, is clamped. Required fixture design fully consider the layout of the components and parts, clear, and technical requirements of parts, from artifacts, analysis and determine the treatment dosage, according to the cutting parameter selection design of component of power transmission chain, on the one hand, fixture and machining can on the jig design is the key, according to the requirements artifacts technology, analysis of positioning, baffle, the support plate positioning, limits the six degrees of freedom of workpiece, processing requ