高速喷涂用接装胶的研制-烟草科技.pdf

烟草科技/ Tobacco Science Technology 烟草化学/ Tobacco Chemistry 2014年第6期（总第323期） 高速喷涂用接装胶的研制 1 2 1 2 2 曹伏军 ，刘文富 ，刘 畅 ，曹贵昌 ，董彦林 1.上海烟草集团北京卷烟厂，北京市通州区万盛南街99号 101121 2. 北京长润化工有限公司，北京市顺义区李桥镇 101304 摘要：为解决喷涂涂胶方式的高速卷烟机因接装胶的适应性原因而造成的滤嘴接装密封性问题，采用醋 酸乙烯（VAc ）、丙烯酸（AA ）和甲基丙烯酸甲酯（MMA ）3 种单体共聚制备高速喷涂用接装胶，讨论了3 种 单体的加入比例、聚乙烯醇规格和加入量、接装胶的粘度等对接装胶使用性能的影响。结果表明：①适 用于喷涂涂胶方式接装胶的配方为：VAc ∶AA ∶MMA 加入的质量比为 10∶2 ∶1 ，聚乙烯醇PVA3 的加入量为 原料总不挥发物的40% ，粘度控制在1700~2400 mPa ·s 之间。②该配方接装胶应用于喷涂涂胶方式稳定 性好，烟支密封度剔除率为0.06% ，有效作业率达到92.6% 。 关键词：高速接装胶；喷涂涂胶；醋酸乙烯；丙烯酸；甲基丙烯酸甲酯；聚乙烯醇；共聚 中图分类号：TS426 文献标识码：A 文章编号：1002-0861 （2014 ）06-0060-04 Development of High Speed Tipping Glue 1 2 1 2 2 CAO Fujun , LIU Wenfu , LIU Chang , CAO Guichang , and DONG Yanlin 1. Beijing Cigarette Factory, Shanghai Tobacco Group Co., Ltd., Beijing 101121, China 2. Beijing Changrun Chemical Industry Co., Ltd., Beijing 101304, China Abstract: For improving the sealing property of filter assembling in high speed cigarette maker, a new glue adapting to spraying application means was developed by copolymerizing vinyl acetate (VAc), acrylic acid (AA) and methyl methacrylate (MMA). The appropriate makeup proportion of the three monomers, specification and adding rate of polyvinyl alcohol (PVA3), and the viscosity of the tipping glue were investigated. The results showed that: 1) The preferable system mass ratio of VAc ∶AA ∶MMA was 10∶2 ∶1, the adding rate of PVA3 was 40% of the total nonvolatile matter in the new material, and the appropriate viscosity should be controlled within 1700-2400 mPa ·s. 2) The developed glue possessed good stability in spraying application system, the rejection rate of cigarettes with unsatisfied sealing was 0.06%, and the machine efficiency was up to 92.6%. Keywords: High speed tipping glue; Glue spraying; Viny