海南大学天然橡胶加工废气治理新工艺及其综合利用.ppt

素彩网---PPT模板免费下载 素彩网---PPT模板免费下载 LOGO New Treatment Process and Comprehensive Utilization on Wastegas of NR Processing 素彩网---PPT模板免费下载 Catalogue 1 Backgrounds 2 Contents 3 Feasibility analysis 4 Design features 5 Benefit Analysis 6 Significance and Prospect 1.Backgrounds Haze of Capital Slight haze of Haikou Main source Industrial waste gas emission Extensive treatment or Emission without treating Haze Initial processing of NR 1.1 ?Fog and Haze 1.2 drying waste gas treatment situation Original waste-gas processing system ☆ exhaust gas through UV pretreatment, direct discharge after spray scrubbing. Waste gas : 400 million m3 each year The temperature of Exhaust gas : 85 ℃ . According to survey: 2. Contents waste-gas processing system after improving 2.1 Pretreatment 2.2 Substituted aeration 3. Feasibility analysis (1) The exhaust gas discharged from dehumidifying section has high power. After subtracting this pressure loss that the cyclone separation section, heat transfer section and gas supply pipe section cause, the residual pressure 88.2kPa still meets the required power of the aeration system. (2) Emissions from the dehumidifier section exceed the original oxygen in the aeration system provides oxygen. (3) The residual-heat of wastegas into the wastewater makes the wastewater temperature elevate appropriately，it can enhance microbial moderate biochemical processes, and so the aerobic tank decontamination efficiency is improved. 4.Design features (1) Combining the original no related wastegas and wastewater treatment processes, full use of the original emissions directly replace or partially replace the aeration device, while also eliminating the original spray scrubbers and ultraviolet processing unit, and that reflects “Energy-saving, Water-saving”. (2) Using skillfully existing resources—NR wastewater and its microorganisms to manage wastegas, and that reflects “Environmental Prot