夜航探照灯车控制系统设计.docxVIP

夜航探照灯车控制系统设计 朱存清李宏 宁波大学信息科学与工程学院 摘要： 设计了一种夜航探照灯车控制系统，包括主控器、数据采集/驱动板、遥控装置 三部分，其中主控器用于灯车监控视频和工作参数的显示，同时接收塔台遥控 装置发送的无线指令控制灯车。数据采集/驱动板包含两部分:数据采集板，用于 对探照灯的工作参数进行采集，包括探照角度、工作电流和电压，且利用传感器 并通过电气隔离的方法实现直流信号的高精度测量；电气驱动板，用于实现灯光 和探照角度控制，釆用汽车电子行业成熟稳定的控制器局域网（CAN）总线进行 通信。塔台遥控装置通过2.4GH%频段与主控器进行通信，组成星状网络控制任 意一台灯车。测试表明:灯车控制系统参数测量精度保持在1%以内、通信稳定可 靠、功能和性能均符合系统设计要求。 关键词： 灯乍控制系统;控制器局域网总线;传感器;电气隔离测量;星状无线网络; 作者简介：朱存清（1990-）,男，硕士研究生，主要研究方向为嵌入式系统设 计。 作者简介：李宏（i960-）,男，通讯作者，副教授，硕士生导师，主要从事嵌 入式系统设计与应用相关研究工作，E-mail: 1 ihong2@nbu. edu. cn。 收稿日期：2017-10-18 Design of control system of night air search light vehicle ZHU Cun-qing LI Hong School of Informstion Science and Engineering, Ningbo University; Abstract： A night air search light vehicle control system is designed, which includes the host controller, data acquisition/driver board, remote control device. The host controller is used to control car monitor video and displeiy working parameters, meanwhile receive wireless instructions from the remote control device to control the lamp vehicle. Data acquisition/driver board consists of two parts, one is the data acquisition board, which is used to collect working parameters of the lamp, including lamp s angle, working current and vol Lage which are accomplished by means of sensor and electrical isolation measurement, the other one is elec trie driven board, which is used to implemc nt ligh t and angle control, the control system adopts the mature and stable controller area network ( CAN) bus in the automotive electronics industry for communication. The tower remote control device communicates with the main controller through the 2. 4 GHz frequency band, which can form the steir network to control any lamp vehicle. The test shows that the paramctcrs of the control system are kept within 1 %, the communication is stable and reliable, the function and performance meet the requirements of system desig n. Keyword： light vehicle control system; controller area network (CAN) bus; sensor; electrical isolati