2015 Impedance-Source Networks for Electric Power Conversion Part II_ Review of Control and Modulation Techniques英文文献资料.pdfVIP

IEEE TRANSACTIONS ON POWER ELECTRONICS, VOL. 30, NO. 4, APRIL 2015 1887 Impedance-Source Networks for Electric Power Conversion Part II: Review of Control and Modulation Techniques Yam P. Siwakoti, Student Member, IEEE, Fang Zheng Peng, Fellow, IEEE, Frede Blaabjerg, Fellow, IEEE, Poh Chiang Loh, Senior Member, IEEE, Graham E. Town, Senior Member, IEEE, and Shuitao Yang Abstract—Impedance-source networks cover the entire spec- trum of electric power conversion applications (dc–dc, dc–ac, ac–dc, ac–ac) controlled and modulated by different modulation strategies to generate the desired dc or ac voltage and current at the output. A comprehensive review of various impedance-source- network-based power converters has been covered in a previous paper and main topologies were discussed from an application point of view. Now Part II provides a comprehensive review of the most popular control and modulation strategies for impedance- source network-based power converters/inverters. These methods are compared in terms of theoretical complexity and performance, when applied to the respective switching topologies. Further, this paper provides as a guide and quick reference for researchers and practicing engineers in deciding which control and modula- Fig. 1. Numbers of publications (Total 1113 as of September 2013). tion method to consider for an application in a given topology at a certain power level, switching frequency and demanded dynamic response. also Y-source [40]. The total number of publications in the rel- evant fields has exceeded one thousand and ope