岩心钻教材资料探工艺.pptVIP

BAORT LONGYEAR BAORT LONGYEAR BAORT LONGYEAR 外锥：流量过低、钻杆泄露 内锥：钻速过快（切入量过大、钻压过大） 外径磨损：流量过小、钻杆泄露、扩孔器外径磨损、振动大（降低转速） 过度磨损：切入量过大，减小钻压和转速，更换硬胎体钻头 钻头抛光：切入量过小，更换软胎体钻头 胎块破裂：钻压过大、跑钻、干孔投放内管、管钳夹持器等、钻孔直径小（扩孔器磨损） 烧钻：钻井液缺失（检查泥浆泵、钻杆密封）、钻压过高、检查内管与钻头内台阶间隙 BAORT LONGYEAR’S STAGE3 Outside Diameter Gauge Loss外径磨损 Possible causes and solutions: Vibration - Lower the rotational speed.Lack of in-hole fluid circulation - Increase the pump rate.The bit is reaming an undersized drill hole - Check the gauge diameter of the reaming shell in use and replace if found to be undersized. 可能原因、技术措施: 振动大—降低转速流量过低—增加流量钻孔直径小（扫