小轴套铸造设计工艺.docVIP

河南机电高等专科学校 毕业论文 毕业论文题目：小轴套的铸造工艺设计 系 部 专 业 班 级 学生姓名 学 号 指导教师 xxxx年xx 月 xx 日 摘要 首先，分析零件的技术条件，明确零件的材料组成以及性能要求。对零件结构的铸造工艺性进行分析，明确零件的结构特点，找出可能存在的结构问题。提出改进措施或预防缺陷的措施。其次,根据零件结构特点，技术要求，生产要求，生产批量，生产条件选择铸造及造型方法。由零件的结构特点，提出多种浇注和分型方案，综合对比分析，选择最为理想的浇注位置及分型面。制定出详细的铸造工艺方案。再次,根据铸造工艺方案和零件的特点，选用适宜的工艺参数，设计铸件的补缩系统，浇注系统。绘制出铸造工艺图。最后,设计铸造工艺装备，包括模板和芯盒,绘制模板和芯盒的装配图。?? 关键字：铸造工艺性?；铸造工艺方案?；铸造工艺参数?；补缩系统；浇注系统。 First of all, the analysis of technical conditions of the parts, material composition and performance requirements of clear parts. On parts of the structure of the casting process is analyzed, the structure characteristics of specific parts, find out the possible existence of structural problems. Put forward the improvement measures or measures to prevent defects. Secondly, according to the structural characteristics of spare parts, technical requirements, production requirements, the production batch, production condition choose casting and modelling method. The structure characteristics of the parts, put forward a variety of casting and classification scheme, comprehensive comparison and analysis, choose the ideal pouring position and parting surface. To develop a casting process in detail. Again, according to the characteristics of the casting process and parts, choose the suitable process parameters, feeding system, the design of casting gating system. Map out the casting process. Finally, the design of casting technology and equipment, including template and core box, draw the assembly drawing template and core box. Key words: casting process; Casting process; Casting process parameters; The feeding system; Gating system. 目录 TOC \o 1-3 \h \z \u 摘要 2 绪论 5 1.1研究背景 5 1.2国内外铸件凝固数值模拟技术的研究现状 5 1.2.1国内铸件凝固数值模拟技术的发展现状 5 1.2.2国外铸件凝固数值模拟技术的发展现状 6 2 零件材料性能分析 8 3.零件结构的铸造工艺性分析 10 4铸造工艺方案的确定 12 4.1.1方案一 12 4.1.2方案二 12 4.1.3方案三 12 4.5.1浇口杯选择 14 4.5.2浇注系统类型 14