模拟集成电路Chapter 12-Switched-Capacitor circuits.pptVIP

Why switched-capacitor (1) First think about continuous-time feedback amplifier. R1 and R2 affect the closed-loop gain; Input resistance R1 loads preceding stage. Fig. 12.1 (a) Continuous feedback amplifier, (b) equivalent circuit The transfer function can be calculated as, Why switched-capacitor (2) Using capacitor to replace the resistor and using RF to define the bias. only if ? ?? (RFC2 )-1 , Vout /Vin ? - C1/C2 for low frequency, the error is large. High pass transfer function, Can use switched-capacitor in the amplifier to solve the problem! switched-capacitor amplifier (1