机电专业英语教学课件作者凌淑莉6.pptVIP

Fig. 11-2 Programming axes 返回 Table 11-4 返回 Fig. 12-1 lnterpolation function 返回 Fig. 12-2 Circular interpolation 返回 Fig. 12-3 Various cutting tools 返回 Fig. 12-4 Tool length offset and length compensation 返回 Fig. 12-5 Cutter radius compensation 返回 * Lesson 12 Motion Types and the Forms of Compensation Straight line motion(also called linear interpolation) This motion type allows the programmer to command perfectly straight line movements as discussed earlier during our discussion of linear interpolation.This motion type also allows the programmer to specify the motion rate(feedrat