P750 无线通讯产品认证管理程序.docVIP

Q/MT00P750—2016A Page PAGE 2 of NUMPAGES 13 PAGE 1 Q/MT00P750—2016A Page PAGE 1 of NUMPAGES 13 Resp dep. 质量保证部 Written/Revised by 潘小刚 Reviewed by: 王亚东 Approved by 李铁 IssuedDate 2016.11.21 Implementation date 2016.12.1 MT(常州)管理体系文件 MT（ChangZhou）Management System Document 无线通讯产品认证和管理程序 Procedures for approval and management of wireless communication products 范围 Scope 目前MTCT/MTCZ无线通讯产品，主要采用Bluetooth、Wi-Fi、ZigBee技术，频率：2.4GHz，因此本程序主要规定了此类产品的无线通讯方面认证要求和管理程序。本程序中无线通讯产品就仅指这三方面产品。通常，采用其他技术，（如RFID，NFC，3G/4G等）的无线产品的认证要求也是强制的，在将来本程序的升级版本中规定。 At present, MTCT/MTCZs wireless communication products are mainly used Bluetooth, Wi-Fi and ZigBee technology which the frequency is at 2.4GHz. So, this program mainly provides the certification requirements and management procedures for these kinds of products. It is called RF products (Wireless communications products) only means to these three kinds of the products in this program. Mostly, the approval requirements of the other kinds of wireless products which used the other technologies (such as RFID, NFC, 3G/4G, etc.), are mandatory approval too, and will be added in the update version of this document in the future. 关于无线通讯产品的其他性能要求，如电磁兼容EMC，计量性能等，参照MT公司其他流程管理规定。 The RF products requirements of the other performances, such as Electromagnetic Compatibility, Metrological Performance and so on, shall be satisfied with other relevant management procedures of MT Company. 引用文件 Normative reference Q/MT00S401 《文件管理程序》《Document Management》 Q/MT00S402 《记录管理程序》《Record Management》 Q/MT00P707 《供方的选择、评价和控制程序》《Selection, Evaluation and Controlling of Supplier Q/MT00S805 《监测、检验控制程序》《Control of measurement and inspection》 Q/MT00S720 《采购过程控制程序》《Controlling of purchasing》 Q/MT00S802 《不合格品控制程序》《Controlling of nonconformity products》 ISO9001 质量管理体系-要求 Quality management system -Requirement 职责 Responsibility 产品认证工程师 Product Approval Engineer 负责产品的认证申请，修改申请，认证资料和样机的完整性检查，与认证机构的联络沟通。到期证书的换证工作等。 Responsible for the applicat