克虏西水泥助磨剂技术问卷.docVIP

KLC CEMENT ADDITIVES TECHNICAL QUESTIONNAIRE 克虏西水泥助磨剂技术问卷 Use one questionnaire for each type of cement produced 每一种水泥使用一份问卷 1.01 Cement company name 1.02 Cement plant name and location 1.03 Date of Visit 2.01 Type of cement produced 2.02 Current concerns (production capacity/early or 28 day strength/ quality/others?) 2.03 Target annual production (tonne) and forecast hours 2.04 Target hourly production (tone) 2.05 Power consumption per tone (kw-H) 2.06 Power cost per tonne (Rmb/kw-H) 2.07 Mineral fillers used for cement additives (%) Clinker Gypsum Fly ash Slag Limestone Other 2.08 Design capacity of finish mill (tonne per hr) 2.09 Actual capacity of finish mill (tonne per hr) 2.10 Finish Mill Type 2.11 Finish mill condition 2.12 Finish mill open or closed circuit? 2.13 Does finish mill have pre-grinder? 2.14 Does finish mill have separator? 2.15 Is cement additives currently used? 2.16 Cement additives brand and type 2.17 Monthly consumption of cement additives (tonne) 2.18 Dosage of cement additives (gram/tonne) 2.19 What is the objective for cement additives addition? Early strength 28day strength Increased capacity Reduced power consumption Reduced ‘pack set’ Others 3.01 Please attach a copy of the following information: Clinker analysis Physical and chemical analysis of cement What is the target for the following: Blaine value Strength Fineness C3S C2S C3A C4AF Loss on ignition Others The above information will be used to make a technical proposal for a KLC Cement Additives trial in the near future Interviews carried out by Persons interviewed Name Position Name Position Name Position Name Position