毕业设计（论文）-薄壁基座零件的数控铣编程与加工仿真.doc

PAGE I 摘 要 本课题来源于生产，是对所学知识的应用，它包括了我们在校几年所学的全部知识，在数控专业上具有代表性，而且提高了综合运用各方面知识的能力。程序的编制到程序的调试，零件的加工运用到了所学的AutoCAD、UG软件、机床操作、刀具的选择、零件的工艺分析、工艺路线等一系列的内容。这将所学到的理论知识充分运用到了实际加工中，切实做到了理论与实践的有机结合，选择正确的加工方法，设计合理的加工工艺过程，充分发挥数控加工的优质、高效、低成本的特点。本文主要对零件进行了,图纸分析、毛坯的选择、加工方法以及加工路线的选择、对刀具机床进行确定，并且选定刀具参数规格，选定机床的型号。然后填写工艺卡片，工序卡片。对零件进行自动编程。 关键词: 数控编程；数控铣削；仿真加工；三维建模 全套图纸加扣?3012250582 Abstract This subject comes from production, is the application of the knowledge we have learned, it includes all the knowledge we have learned in school for several years, and it is representative in numerical control specialty, and improves the ability of comprehensive application of all aspects of knowledge.Programming to the debugging of the program, parts processing applied to the AutoCAD UG software, machine tool operation, tool selection, part process analysis, process route and a series of contents.In this way, the theoretical knowledge learned is fully applied to the practical processing, the organic combination of theory and practice is achieved, the correct processing method is chosen, the reasonable processing process is designed, and the number is brought into full play. High quality, high efficiency and low cost of controlled processing.In this paper, the parts, drawing analysis, blank selection, machining method and machining route are selected, the tool machine tool is determined, and the tool parameter specification is selected, and the model of the machine tool is selected.Then fill in the process card, process card.Program the parts automatically. Keywords: NC programming, NC milling, simulation machining, 3D modeling 目 录 TOC \o 1-3 \h \z \u 4882 摘 要 I 18756 Abstract II 17085 目 录 III 4240 第一章 绪论 1 3342 1.1 本课题的目的及意义 1 26525 1.2 数控机床及数控技术的应用与发展 1 8710 第二章 工艺性分析 3 9723 2.1零件介绍 3 3135 2.2零件加工工艺性分析 4 8187 第三章 零件加工工艺规程设计 5 31325 3.1 毛坯的选择 5 12006 3.1.1确定毛坯的类型 5 30964 3.1.2 确定毛坯的余量 5 3005 3.2加工方法及工艺路线的确定 6 18612 3.2.1加工方法的选择 6 6472 3.2.2工序的划分 6 6872 3.3选