c1325-96中文版-无石棉纤维毡增强水泥内衬薄板的标准规范.docVIP

C 1325 PAGE 901 Designation: C 1325-96编号: C 1325-96 PAGE 895 Standard Specification forNon-Asbestos Fiber-Mat Reinforced Cement InteriorSubstrate Sheets This specification is under the jurisdiction of ASTM Committee C-17 on Fiber-Cement Products and is the direct responsibility of Subcommittee C17.01 on Test Methods.该标准由ASTM负责纤维产品的C-17委员会管辖，并由负责试验方法的C17.01小组委员会直接负责。Current edition approved Jan. 10, 1996. Published April 1996.现行版本于1996年1月10日批准，并于1996年4月出版。无石棉纤维毡增强 This specification is under the jurisdiction of ASTM Committee C-17 on Fiber-Cement Products and is the direct responsibility of Subcommittee C17.01 on Test Methods.该标准由ASTM负责纤维产品的C-17委员会管辖，并由负责试验方法的C17.01小组委员会直接负责。Current edition approved Jan. 10, 1996. Published April 1996.现行版本于1996年1月10日批准，并于1996年4月出版。 This standard is issued under the fixed designation C 1325; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C1325刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 1.1 This specification covers non-asbestos fiber-mat reinforced cement substrate sheets manufactured to be dimension- ally stable and suitable as either an unfinished substrate (see Note 1) or as a substrate for decoration such as natural stone or tile in internal wet and dry areas.该标准涵盖生产尺寸稳定且适合作未抛光底板（见注1）或者用于室内潮湿或干燥环境的天然石瓦等装饰材料底板的无石棉纤维毡增强水泥内衬板。 Note 1—When used as an unfinished substrate, consult the manufacturers written installation literature for proper application details.注1—— 作用于粗制底板时，关于其正确的适用细节可咨询厂商书面安装文献。 This specification is not applicable to asbestos-cement flat sheets (Specification C 220); non-asbestos fiber cement flat sheets for exterior applications such as claddings, facades, curtain walls, and soffits (Spec