c1370-97中文版-用于含硫高聚物水泥混凝土的骨料合格性测定的标准试验方法.docVIP

C 1370 PAGE 916 Designation: C 1370-97编号: C 1370-97 PAGE 913 Standard Test Method forDetermining the Acceptability of Aggregates for Use in Sulfur Polymer Cement Concrete1 用于含硫高聚物水泥混凝土的骨料合格性测定的标准试验方法 This test method is under the jurisdiction of ASTM Committee C-3 on Chemical-Resistant Nonmetallic Materials and is the direct responsibility of C03.02 on Mortar and Monolithics.Current edition approved March 10, 1997. Published February 1998.本规范由ASTM委员会C-3抗化学性非金属材料委员会管辖，并由C03.02灰浆和整体分委会直接负责。现行版本于1997年3月10日批准，并于1998年2月出版。 This standard is issued under the fixed designation C 1370; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval.本标准以固定编号C1370刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope适用范围 1.1 This test method covers the determination of the effects of selected environments on aggregates for use in manufacturing sulfur polymer cement concrete (SC).该试验方法可用来测定聚合物在选定的环境下用于生产含硫高聚物水泥混凝土的效果。(是不是原文没有复制完整?) 1.2 The values stated in inch-pound units are to be regarded as the standard. The metric equivalents of inch-pound units given in parentheses in the standard may be approximate.用英寸磅单位表示的值可视为标准值，本标准内括弧中给出的等同于英寸磅单位的米制单位可为近似值。(以后把Metric都翻成公制) 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.本标准并非旨在解决所有与标准使用相关的安全问题（如有）。本标准使用者有责任确立适用的安全和健康规范并在使用前评估其是否符合有关条例。 2. Referenced Documents参考文件 2.1 ASTM Standards:ASTM 标准： C 904 耐化学腐蚀的非金属材料的术语 Annual Book of ASTM Standards, Vol 04.05. Annual Book of ASTM Standards, Vol 04.05.ASTM标准年鉴第04.05卷。 2