c1364-97中文版-建筑铸石的标准规范.docVIP

C 1364 PAGE 911 Designation: C 1364 – 97编号：C 1364 - 97 PAGE 910 Standard Specification for Architectural Cast Stone This specification is under the jurisdiction of ASTM Committee C-27 on Precast Concrete Products and are the direct responsibility of Subcommittee C27.20 on Architectural and Structural Products.本试验方法受ASTM This specification is under the jurisdiction of ASTM Committee C-27 on Precast Concrete Products and are the direct responsibility of Subcommittee C27.20 on Architectural and Structural Products.本试验方法受ASTM委员会C-27预制混凝土制品委员会管辖，并且由C27.20建筑结构制品分委会直接负责。Current edition approved Feb. 10, 1997. Published April 1997.现行版本于1997年2月10日批准，并于1997年4月出版。 This standard is issued under the fixed designation C 1364; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C 1364刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 This specification covers the physical requirements, sampling, testing, and visual inspection of architectural cast stone.本规范包含建筑铸石的物理要求、取样、试验和目视检验。 Units covered by this specification may be made from facing and backup mixtures or from a homogeneous mixture. Either wet cast or dry cast production methods may be used.本规范包含的砌块单元由饰面和备份混合物或类似混合物制造。可采用湿铸或干铸生产方法。 Surface textures, finish, color, or other special features should be specified separately by the purchaser.买方应分别规定表面纹理、抛光、颜色或其他特别特征。 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.以英寸-磅为单位的值为标准值。括号内的值仅供参考。 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health