c1357-98a中文版-评定砌块粘结强度的标准试验方法.docVIP

C 1357 PAGE 918 Designation: C 1357 -98a编号: C 1357 -98a PAGE 903 Standard Test Methods for Evaluating Masonry Bond Strength These test methods are under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and are the direct responsibility of Subcommittee C15.05 on Masonry Assemblies.该试验方法归ASTM负责成品砌块的C-15委员会管辖，并由负责砌块组配的C15.05小组委员会直接负责。Current edition approved Nov. 10, 1998. Published December 1998. Originally published as C 1357-96. Last previous edition C 1357-98. These test methods are under the jurisdiction of ASTM Committee C-15 on Manufactured Masonry Units and are the direct responsibility of Subcommittee C15.05 on Masonry Assemblies.该试验方法归ASTM负责成品砌块的C-15委员会管辖，并由负责砌块组配的C15.05小组委员会直接负责。Current edition approved Nov. 10, 1998. Published December 1998. Originally published as C 1357-96. Last previous edition C 1357-98.现行版本于1998年11月10日批准，并于1998年12月出版。最初版本编号为C1357-96，上一版本编号为C 1357-98。 This standard is issued under the fixed designation C 1357; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C1357刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 INTRODUCTION简介 Bond strength between mortar and masonry units is an important physical property of masonry. Increased bond strength provides greater resistance to loads and to cracking. Bond strength therefore influences structural integrity and serviceability.灰浆和砌块间的粘结强度属于砌块的一个重要物理属性。加强的粘结强度具有更好的抗负载和防破裂性能。因此粘结强度影响着结构完整性和可用性。 1. Scope 适用范围 1.1 These test methods cover the evaluation of flexural bond strength, normal to the bed joints, of masonry built of manufactured masonry units, as determined in accordance with Test Method C 1072. Sampling and testing procedures are referenced, and terms are denned. Tw