c800-94中文版-玻璃纤维毡绝热材料（飞机型）.docVIP

C 800 PAGE 424 Designation: C 800 – 94编号：C 800-94 PAGE 419 Standard Specification forGlass Fiber Blanket Insulation (Aircraft Type) This specification is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C 16.23 on Blanket and Loose Fill Insulation.本规范由 This specification is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C 16.23 on Blanket and Loose Fill Insulation.本规范由ASTM委员会C-16隔热委员会管辖，并由C16.23绝缘保温层与松散填充绝热层分委会直接负责。Current edition approved April 15, 1994. Published June 1994. Originally published as C 800 - 75. Last previous edition C 800 - 89.现行版本于1994年4月15日批准，并于1994年6月出版。最初出版编号 This standard is issued under the fixed designation C 800; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C800刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 This standard has been approved for use by agencies of the Department of Defense to replace MIL-B-5924B (ASGj. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.本标准取代MIL-B-5924B（ASG）并已经获得批准供（美国）国防部各部门使用。对于（美国）国防部采用的具体刊发年份，请查阅（美国）国防部规范与标准索引。 1. Scope适用范围 This specification covers the composition, size, dimensions, and physical properties of glass fiber blanket thermal and acoustical insulation for use up to 700°F (370℃) in aircraft applications. For specific applications, the maximum temperature shall be agreed upon between the supplier and the purchaser.本标准涵盖了在温度高达700℉ When the installation or use of thermal insulation materials, accessories, and systems may pose safety or health problems, the manufacturer sha