c929-94中文版-奥氏体不锈钢上所用绝热材料的加工、运输、海运、贮藏、验收和应用的标准规范.docVIP

C 929 PAGE 459 Designation: C 929 - 94 PAGE 458 Standard Practice forHandling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel This practice is under the jurisdiction of ASTM Committee C-16 on Thermal Insulation and is the direct responsibility of Subcommittee C 16.20 on Homogeneous Inorganic Thermal Insulation.1.本规范由ASTM委员会C-16隔热材料委员会管辖，并由C16.20同类无机隔热材料分委会直接负责。Current edition approved March 15, 1994. Published May 1994. Originally published as C 929 - 80. Last previous edition C 929 - 88.现行版本于1994年3月15日批准，并于1994年5月出版。最初版本编号为C929-80，上一版本编号为C 929-88。 奥氏体不锈钢上所用绝热材料的加工、运输、海运、贮藏、验收和应用的标准规范 This standard is issued under the fixed designation C 929; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号C929刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标(ε)表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 This practice is intended to provide guidance and direction in the handling, transporting, shipping, storage, receiving, and application of thermal insulating materials to be used as a surface treatment or as part of the thermal insulation system in contact with austenitic stainless steel.本规范旨在为奥氏体不锈钢上用作表面处理材料或隔热系统组成部分的隔热材料的加工、运输、海运、贮藏、验收和应用提供指导和指南。 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.本标准并未对与标准使用相关的所有安全事项（如有）做出规定。本标准使用者有责任确立适用的安全和健康规范并在使用前评估其是否符合有关条例。 2. Referenced Documents 参考文献 2.1 ASTM Standards:ASTM标准 C 168 Terminology Relating to Thermal Insulating Materials Annual