d3880-90中文版-单位面积石棉强度的标准试验方法.docVIP

D 3880 PAGE 1059 Designation: D 3880-90 (Reapproved 1995)编号：D 3880-90（于1995年重新审批） PAGE 1056 Standard Test Method for Asbestos Strength Units This test method is under the jurisdiction of ASTM Committee C-17 on Fiber-Cement Products and is the direct responsibility of C17.03 on Asbestos-Cement Sheet Products and Accessories.本规范归ASTM负责纤维水泥产品的 This test method is under the jurisdiction of ASTM Committee C-17 on Fiber-Cement Products and is the direct responsibility of C17.03 on Asbestos-Cement Sheet Products and Accessories.本规范归ASTM负责纤维水泥产品的C-17委员会管辖，并由负责石棉水泥产品的C17.03委员会直接负责。 Current edition approved Oct. 26, 1990. Published December 1990. Originally published as D 3880 - 80. Last previous edition D 3880 - 88.现行版本于1990年10月26日批准，并于1990年12 This standard is issued under the fixed designation D 3880; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号D 3880刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 1.1 This test method gives a procedure for the evaluation of the strength-giving properties of asbestos fibers used to reinforce asbestos-cement products.本试验方法涉及评价石棉水泥制品加固用的石棉纤维强度性能的程序。 1.2 The purpose of this test method is to determine the number of strength units that may be assigned to the sample tested.本试验方法的目的在于测定分配给受测样品的强度单元的数量。 1.3 Asbestos fiber possesses the ability to impart strength to an asbestos-cement product. Every fiber grade may be regarded as possessing a certain quantity of strength-giving units. The quantity of fiber required in an asbestos-cement composition varies inversely with the number of strength units it possesses. For example, if an amount, designated by X, of a fiber possessing 100 strength units produces a product of a given stre