e90-97中文版-实验室测量建筑物隔墙和构件的气载声传输损失的标准试验方法.docVIP

E 90 PAGE 824 Designation: E 90 – 97编号：E 90–97 An American National Standard一个美国国家标准 PAGE 815 Standard Test Method forLaboratory Measurement of Airborne Sound TransmissionLoss of Building Partitions and Elements This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.O3 on Sound Transmission.本规范由ASTM委员会E-33环境声学委员会管辖，并由E33.03声传输分委会直接负责。Current edition approved March 10, 1997. Published August 1997. Originally published as E 90 - 55. Last previous edition E 90 - 96.现行版本于1997年3月10 This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.O3 on Sound Transmission.本规范由ASTM委员会E-33环境声学委员会管辖，并由E33.03声传输分委会直接负责。Current edition approved March 10, 1997. Published August 1997. Originally published as E 90 - 55. Last previous edition E 90 - 96.现行版本于1997年3月10日批准，并于1997年8月出版。最初版本编号为 This standard is issued under the fixed designation E 90; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号E 90刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 INTRODUCTION前言 This test method is part of a set for evaluating the sound-insulating properties of building elements. It is designed to measure the transmission of sound through a partition or partition element in a laboratory. Others in the set cover the measurement of sound isolation in buildings(Test Method E 336), the laboratory measurement of impact sound transmission through floors (Test Method E 492), the measurement of impact sound transmission in buildings (Test Method E 1007), the measurement of sound transmission through building facades and facade elemen