e336-97中文版-建筑物内空气声隔声测量的标准试验方法.docVIP

E 336 PAGE 838 Designation: E 336 – 97 An American National Standard编号：E 336 – 97 一个美国国家标准 PAGE 837 Standard Test Method forMeasurement of Airborne Sound Insulation in Buildings This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.03 on Sound Transmission.Current edition approved March 10, 1997. Published August 1997. Originally published as E 336 - 71. Last previous edition E 336 - 96.本规范由 This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.03 on Sound Transmission.Current edition approved March 10, 1997. Published August 1997. Originally published as E 336 - 71. Last previous edition E 336 - 96.本规范由ASTM委员会E-33环境声学委员会管辖，并由E33.03声音传播分委会直接负责。现行版本于1997年3月10日批准，并于1997年8月出版。最初版本为E 336-71 This standard is issued under the fixed designation E 336; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号E 336刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 This test method has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.本标准已获得批准供（美国）国防部各部门使用。对于（美国）国防部采用的具体刊发年份，请查阅（美国）国防部规范与标准索引。 INTRODUCTION引言 This test method is part of a set of standards for evaluating the sound-insulating properties of building elements. It is designed to measure the sound isolation between two rooms or the performance of a partition element installed as an interior part of a b