e596-96中文版-实验室测量隔音封闭罩降噪的标准试验方法.docVIP

E 596 PAGE 896 Designation: E 596 - 96 An American National Standard编号： E 596 - 96 一个美国国家标准 PAGE 891 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.03 on Sound Transmission.Current edition approved Jan. 10, 1996. Published April 1996. Originally published as E 596 - 77. Last previous edition E 596 - 94a.本规范 This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.03 on Sound Transmission. Current edition approved Jan. 10, 1996. Published April 1996. Originally published as E 596 - 77. Last previous edition E 596 - 94a.本规范由ASTM委员会E-33环境声学分委会管辖，并由E33.03开敞式平面布置空间分委会直接负责。现行版本于1996年1月10日批准，并且于1996年4月出版。最初版本为E 596-77 This standard is issued under the fixed designation E 596; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号E 596刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 This standard has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for the specific year of issue which has been adopted by the Department of Defense.本标准已获得批准供（美国）国防部各部门使用。对于（美国）国防部采用的具体刊发年份，请查阅（美国）国防部规范与标准索引。 1. Scope 适用范围 1.1 This test method covers the reverberation room measurement of the noise reduction of sound-isolating enclosures.本试验方法涵盖了对隔音封闭罩降噪的混响室测量。 1.2 The noise isolation class may be determined from the noise reduction measured in accordance with this test method.