e795-93中文版-吸音试验过程中安装试样的标准实施规范.docVIP

E 795 PAGE 917 Designation: E 795 - 93 An American National Standard 编号：E 795 - 93 一个美国国家标准 PAGE 916 Standard Practices forMounting Test Specimens During Sound Absorption Tests These practices are under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and are the direct responsibility of Subcommittee E 33.01 on Sound Absorption.Current edition approved Apr. 15, 1993. Published June 1993. Originally published as E 795 - 81. Last previous edition E 795 - 92. These practices are under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and are the direct responsibility of Subcommittee E 33.01 on Sound Absorption. Current edition approved Apr. 15, 1993. Published June 1993. Originally published as E 795 - 81. Last previous edition E 795 - 92.本规范由ASTM委员会E-33环境声学分委会管辖，并由E33.01开敞式平面布置空间分委会直接负责。现行版本于1993年4月15日批准，并于1993年6月出版。最初版本为E 795-81。 This standard is issued under the fixed designation E 795; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号E 795刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 1.1 These practices cover test specimen mountings to be used during sound absorption tests performed in accordance with Test Method C 423.这些规范涵盖了在根据试验方法C 423进行的吸音试验中使用的试样的安装。 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.国际单位所述数值视为标准值。括号内数值仅供参考。 2. Referenced Documents 参考文件 2.1 ASTM Standards:ASTM标准： C 423 使用混响室方法的吸音和吸音系数的试验方法 Annual Book of ASTM Standards, Vol 04.06.ASTM标准年鉴，第04.06卷。 Test Method for Sound Absorption and Sound An