e756-98中文版-测量材料减振性能的标准试验方法.docVIP

E 756 PAGE 905 Designation: E 756 - 98 (Reapproved 1995年重新批准)ε1 编号：E 756 - 98 （1995年重新批准）ε1 Copyright ?ASTM, 100 Barr Harbor Drive. West Conshohocken, PA 19428-2959, United StatesASTM版权所有，地址：美国宾夕法尼亚州西康舍霍肯Barr Harbor Drive 100号（邮编：19428-2959）。 PAGE 904 Standard Test Method forMeasuring Vibration-Damping Properties of Materials This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.O3 on Sound Transmission.Current edition approved September 10, 1998. Published November 1998. Originally published as E 756-80. Last Previous edition E 756-93.本规范由ASTM This test method is under the jurisdiction of ASTM Committee E-33 on Environmental Acoustics and is the direct responsibility of Subcommittee E33.O3 on Sound Transmission.Current edition approved September 10, 1998. Published November 1998. Originally published as E 756-80. Last Previous edition E 756-93.本规范由ASTM委员会E-33环境声学委员会管辖，并由E33.03声音传播分委会直接负责。现行版本于1998年9月10日批准，并于1998年9月出版。最初版本为E 756 This standard is issued under the fixed designation E 756; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (ε) indicates an editorial change since the last revision or reapproval.本标准以固定编号E 756刊发；紧随编号后的数字表示最初采用的年份，或者是修订版的最后修订年份。圆括号中的数字表示最新重新批准的年份。上标（ε）表示自上一修订版或重新批准后的编辑性修改。 1. Scope 适用范围 This test method measures the vibration-damping properties of materials: the loss factor,η, and Youngs modulus, E, or the shear modulus, G. Accurate over a frequency range of 50 to 5000 Hz and over the useful temperature range of the material, this method is useful in testing materials that have application in structural vibration, building acoustics, and the control of audible noise. Such materials include metals, enamels, ceramics, rubbers, plastics, reinforced epoxy matrices