基于PLC除尘设备控制系统的设计10.12.docxVIP

PAGE PAGE 1 摘要 工业作为我国第二支柱产业，在近十几年来发展非常迅速，虽然带了了可观的经济效益，但在工业生产中所产生的大量粉尘气体对大气的污染现象也不容忽视。为减少工业粉尘对环境的污染，世界各国制定了严格的环境保护要求。为了减少工业中粉尘的排放，除尘器的研发改良，以及燃煤的使用等等都在不断更改以符合粉尘排放标准。而目前最先进的除尘设备无机膜除尘器具备除尘效率高，稳定性好，结构紧凑易于维护等优点，且无机膜对于粉尘吸附效率高，抗腐蚀能力优秀，耐高温，因此能更有效应用于高温烟气的除尘。本文根据PLC技术在除尘方面的应用，来优化设计无机膜除尘器除尘控制系统，对其气力输送系统进行完善，实现粉尘的自动清除与输送。 本系统采用西门子S7-200可编程逻辑控制器，通过STEP 7-Micro/WIN 32编程软件编程，来设计除尘设备粉尘清除与输送一体化的控制系统。经过对系统的实际调试，使预期目标得以实现。 关键词： 无机膜除尘；可编程逻辑控制器（PLC）；STEP 7-Micro/WIN 32；气力输送 PAGE PAGE 1 Abstart Industry as the second pillar industry in china, In the last ten years to develop very quickly, Although with considerable economic benefits, But in the industrial production of a large number of dust gas pollution phenomenon can not be ignored. In order to reduce the pollution to the environment of industrial dust, Countries around the world have developed strict environmental protection requirements.In order to reduce the emission of dust in industry, Development and improvement of dust collector, And the use of coal and so on are constantly changing in order to meet the dust emission standards. And at present the most advanced dust removal equipment inorganic membrane dust collector with high dust removal efficiency, Good stability, Compact structure easy to maintain and so on, And the inorganic membrane has high adsorption efficiency for dust, Excellent corrosion resistance, High temperature resistance, so it can be more effectively used in the dust removal of high temperature flue gas. Based on the application of PLC technology in dust removal, To optimize the design of the dust control system of inorganic membrane filter, Perfect the pneumatic conveying system, Automatic cleaning and conveying of dust. This system uses the SIEMENS S7-200 programmable logic controller, Through the STEP7-Micro/WIN V4.0 programming software programming, Integrated control system for dust removal and transportation of dust removal equipment. After the actual debugging of the system, To achi