长壁工作面顺槽顶板支护设计外文文献翻译、中英文翻译.docVIP

英文原文  A Method for The Design of Longwall Gateroad Roof Support W.Lawrence Geowork Engineering, Emerald, QLD, Australia Abstract:A longwall gateroad roof support design method for roadway development and panel extraction is demonstrated. It is a hybrid numerical and empirical method called gateroad roof support model(GRSM), where specification of roof support comes from charts or equations. GRSM defines suggested roof support densities by linking a rock-mass classification with an index of mining-induced stress, using a large empirical database of Bowen Basin mining experience. Inherent in the development of GRSM is a rock-mass classification scheme applicable to coal measure strata. Coal mine roof rating(CMRR) is an established and robust coal industry standard, while the geological strength index(GSI) may also be used to determine rock-mass geomechanical properties. An elastic three-dimensional numerical model was established to calculate an index of mining induced stress, for both roadway development and longwall retreat.Equations to calculate stress index derived from the numerical modeling have been developed. An industry standed method of quantifying roof support is adopted as a base template (GRSUP). The statistical analyses indicated that an improved quantification of installed support can be gained by simple modifications to the standard formulation of GRSUP. The position of the mathematically determined stable/failed boundary in the design charts can be changed depending on design criteria and specified risk. Key words:Coal mine;Roof control;Support;Design. Introduction Longwall gateroad strata stability is essential to ensure uninterrupted production. In Central Queensland’s Bowen Basin, immediate gateroad roof lithology varies from coal to weak interlaminated material, to strong almost massive sandstone, with localised areas of weak fault affected strata. It is usual for roof conditions within any one mine to vary significantly. Typically, longwall