一种基于分枝定界算法的注塑模架基工艺规划系统外文文献翻译、中英文翻译.docVIP

资料来源： 文章名：一种基于分枝定界算法的注塑模架基工艺规划系统 书刊名：《Advanced Manufacturing Technology》 作 者： P. Y. Gan, K. S. Lee and Y. F. Zhang 出版社：Department of Mechanical Engineering, National University of Singapore, Singapore 章 节：A Branch and Bound Algorithm Based Process-Planning System for Plastic Injection Mould Bases 页 码：10.1007/s0017001一种基于分枝定界算法的注塑模架基工艺规划系统 70022 文 章 译 名： A Branch and Bound Algorithm Based Process-Planning System for Plastic Injection Mould Bases P. Y. Gan, K. S. Lee and Y. F. Zhang Department of Mechanical Engineering, National University of Singapore, Singapore This paper describes the use of artificial intelligence in the process planning of plastic injection mould bases. The com- puter-aided process-planning system, developed for IMOLD? will extract and identify the operations required for machining. These operations are considered together with their precedence constraints and the available machines before the process plan for the mould base plate is generated. The process plan is optimised by a branch and bound based algorithm. Overall machining time has been proposed as the objective function for optimisation. The ability of this algorithm to search intelli- gently for a feasible optimised solution is illustrated by an industrial case study. A brief comparison with a genetic algor- ithm based process planning system is also made. The result of this development will allow users to optimise process plans easily for any given mould base, with options to suit dynamic changes on the manufacturing shop floor. Keywords: Branch and bound algorithm; Computer-aided process-planning (CAPP); Optimisation; Plastic injection mould base 1. Introduction Computer-aided process planning (CAPP) has received much attention in recent years. It has long been identified as the bridge between computer-aided design (CAD) and computer- aided manufacturing (CAM) systems to achieve a fully auto- mated factory. Despite the need, insufficient CAPP systems have been devel