AS5101.4-2008 国外国际规范.pdf

1 AS 5101.4—2008 Australian Standard® A S Methods for preparation and testing of stabilized 5 1 0 1 materials . 4 — 2 0 0 Method 4: Unconfined compressive strength of 8 compacted materials 1 SCOPE This Standard sets out the method for determining the unconfined compressive strength of compacted specimens of unbound, bound and self-cementing materials. This method is applicable to the control testing of field or plant mix materials and for the assessment of the strength of materials mixed in the laboratory. The test is conducted on that portion of the material that passes the 19.0 mm sieve. NOTE: The exclusion of a large proportion of stone coarser than 19.0 mm may have a major effect on the unconfined compressive strength determined compared with that obtainable with the material as a whole. 2 REFERENCED DOCUMENTS The following documents are referred to in this Standard: AS 1141 Methods for sampling and testing aggregates 1141.1 Method 1: Definitions 1141.2 Method 2: Basic testing equipment 1152 Specification for test sieves 1289 Methods of testing soils for engineering purposes 12 Method 1.2.1: Sampling and preparation of soils—Disturbed samples— 8 0 Standard method 0 2 l 12 Method 2.1.1: Soil