电源插头注射模参考论文.docx

编号： 飞冷二夕 quills UNIVERSITY OF ELECTRONIC TECHNOLOGY 毕业设计说明书 题 目 电源插头注射模设计 学 院： 专 业： 学生姓名： 学 号： 指导教师： 职 称： 题目类型： O论研究验研究匸工程设计「工程技术研究匚软件开发 年 月曰 摘要 塑料模具的发展是随着塑料工业的发展而发展的。近年业，人们对各种设备和用品 轻量化要求越来越高，这就为塑料制品提供了更为广阔的市场。为了做到高质高效低成 本来提高市场占有率，注塑模具的开发、设计具有重大意义。 本设计对 电源插头”进行研究和讨论，分析了其工艺特点，介绍其注射模结构及 模具的工作过程，系统阐述了注射模设计过程，对电源插头塑料制件结构和成型工艺进 行分析，主要包括成型位置的及分型面的选择，模具型腔数的确定及型腔的排列和流道 布局和浇口位置的选择，模具工作零件的结构设计，推出机构的设计，拉料杆的形式选 择，排气方式设计等。通过对流量计控制阀体工艺的正确分析，设计了一副一模两腔的 塑料模具，通过对比确定了合适的分型面并针对其结构特点采用了卧式注射机。在本次 设计中抽芯机构是设计的难点也是重点。由于零件一个侧向有空，因此采用侧向抽芯机 构，设置2个斜导柱抽芯，通过推杆推出塑件。 本设计方案结构紧凑，满足制品大批量生产、高精度、外形复杂的要求，设计参考 了以往注射模具的设计经验，并结合制件性能，简化设计机构，并且运用AutoCAD Pro/e 等软件进行二维和三维绘图，缩短了生产周期。 关键词：电源插头；塑料注射模；侧抽芯 桂林电子科技大学毕业设计（论文）报告用纸 Abstract The plastic molds developme nt is develops along with the plastics in dustry developme nt. In rece nt years, the people were gett ing higher and higher request to lightweight of each kind of equipme nt and the thing, this has provided a broader market for the plastic products. To be high efficie nt and cost-effective tool to enhance their market shares and developme nt, desig n is of vital importa nee. The desig n of the power plug to carry out research and discussi on, and an alysis of the characteristics of its tech no logy to in troduce the structure of injectio n mold and die work processes,systems on the process of injection mold design, plastic fittings for power plug structure and forming process analysis, including the location and the molding surface of choice, to determine the number of mold cavity and the cavity flow arrangement and the layout and the choice of gate locatio n, the work of parts of the structure of mold desig n, the introduction of institutional design, drawing materials under the form of options, such as exhaust desig n. Through the correct process an alysis, desig n two cavities of plastic die, and determ ine surface and structural horiz on tal injectio n moldi ng machi ne by compari ng As part of a free to use to the socket, therefore, the two