毕业设计（论文）-家用刨冰机机体注射成型模具设计.docx

1 1 家用刨冰机机体注射成型模具设计  摘 要 本次课题针对家用刨冰机机体，完成了注射模拟分析和模具的结构设计。选择 PP 作为塑件的材料。其整体外观上近似四棱台。外、内层侧壁上有φ20mm 和φ10mm 两个同心孔。首先使用 UG 软件对塑件进行三维造型，然后导入到 Moldflow 软件中对塑件进行注射模拟分析。根据模拟分析结果确定浇注系统和冷却系统的总体设计方案，并依据相关数据优化成型工艺。根据家用刨冰机机体的塑件生产图样进行塑件的结构及成型工艺性分析。然后选择模具分型面并确定了型腔数目。选用的成型设备为 XS-ZY-1000 型注射机。确定了型芯型腔相关零件的结构与推出机构的设计方案，并完成了总装图结构设计。模具采用一模一腔、两点浇口、滑块侧抽芯结构。 关键词 家用刨冰机机体 注射模拟 模具设计 点浇口 滑块侧抽芯 全套图纸加扣 3346389411或3012250582 PAGE PAGE 2 Abstract Plastic molding is a very common method in plastic processing. As an important tool in plastic molding, injection mold has higher requirements for quality and precision in the process of processing. With the development of the country, the position of plastic molding in the basic industry is constantly improving. More and more plastic products are produced through injection molding mold. The main content of this paper is the analysis and design of the injection mold for the body of ice planer. The main purpose of this design is to analyze the technological requirements of the shape, size and precision of the plastic part and the design and analysis of the injection molding shape and process. The shape and molding technological requirements of the plastic part include the determination of the wall thickness, surface roughness and the precision of the shape and size of the plastic part. Through the analysis and design of the molding process requirements of the plastic parts, the process parameters and assembly drawings of the injection molding machine and the injection molding system are determined, and the parting surface of the injection molding machine and the mold, the number and arrangement of the cavity, the size and structure design of the pouring molding system are determined. The most important point is to analyze and determine the size and structure of the cavity and core of the injection molding machine. Analyze and calculate the parameters of the injection molding machine mold and cooling system, determine the closed height parameters of the